FriktionTek® Ceramic Treatments for Cars, Trucks & SUVs
Problems
Loss of power and compression
Smoking, burning oil or emission problems
Poor gas mileage
Noise and vibration in engine, transmission, differentials and power steering
Slipping transmission / difficulty in shifting
Low oil pressure
Power steering difficulties
Cold starts / difficulties starting
Solutions
FriktionTek® is the best engine and transmission treatment ever created for improving your car's overall performance. The technology combines the best attributes of ceramics and metals to reduce friction, heat and wear.
Extends Part Life: FriktionTek® produces a surface much harder and smoother than steel. It penetrates metal to a depth of 10 to 30 microns, becoming part of the surface it protects. FriktionTek's coating is extremely resistant to corrosion and reduces heat. As FriktionTek® works, it "customizes" the tolerances in each unique assembly, resulting in smoother operation. All of this acts to prolong engine, transmission and differential life by a factor of two to three times.
Economical Repair: FriktionTek® works while you drive. This means no down time. The resulting coating actually resurfaces the internal metal parts of your engine, transmission, differential or power steering unit. In gearboxes it has been shown to reach a thickness of 63 thousandths of an inch. In piston/cylinder groups, it has reached nearly 8 thousandths.
Fuel Economy: FriktionTek® can reduce your vehicle's fuel consumption. Fuel savings of 10% to 15% is very common. Even brand new vehicles typically see an improvement in gas mileage up to 5% because the new ceramic coating is smoother than the original surface.
Performance: FriktionTek® will make your car's motor run more smoothly with less friction. It also works to improve engine compression. The result is a smoother, quieter engine with more power.
The Environment: FriktionTek® works to improve the tolerances in your engine, reducing exhaust emissions dramatically in a remarkably short time. We have documented carbon monoxide being reduced as much as 82%.
Safety: FriktionTek® works where there is excess friction. As the coating is formed and the friction becomes less, the process is stopped. It is self limiting. The coating grows until it has done its job, then it stops. FriktionTek® is inert with respect to fuels and lubricants. It does not interact with them or change their properties in any way. FriktionTek® modifies the metal surface structure to give it the properties of a ceramic.
